SEPARATORE release agent, 200 ml

Agent Separatore 200 ml - silicone separation agent for multipart moulds

Separating agent for two or more parts of the moulds

Separatore release agent is an auxiliary product used in the manufacture of Silicone moulds consisting of two or more parts. His role is to prevent the adhesion of the newly applied or poured silicone over an already vulcanized silicone surface.

The product is useful when the geometry of the model does not allow the practical realization of the mould from one piece and it is necessary to build successive parts of the mould.

Recommended applications

• Silicone moulds made from two parts;
• multipart moulds with several separate elements;
• silicone-silicone separation zones between two successive stages of the mould;
• models with complex geometry for which the mould must be built from several parts.

Usage

After making and vulcanizing the first part of the mould, Agent Separatore is applied by brushing only on silicone surface that will come into contact with the next part of the mould.

The role of the product is strictly to prevent the bonding of the two silicone surfaces in the separation area.

Important: apply the product only to the contact surface where the two parts of the mould must be separated afterwards.

Practical advantages

• Prevents silicone gluing In the separation area of the mould.
• Allows the successive realization of the parts of a mould.
• Local application by brushing on the contact surface.
• It is useful for mould with complex geometry requiring construction from two or more parts.

Practical example - two-part mould

For a mould made up of two halves, first the first part of silicone is made. After its vulcanisation, the silicone area that will be in contact with the second part is treated with Agent Separatore.

The second part of the mould is then made. The separation agent is intended to prevent the adhesion between the Silicone of the first part and the silicone applied or poured in the next stage.

Best TOOLS Recommendations

Before making a multipart mould, set clearly Separation plan And the order in which the parts of the mould will be built. Agent Separatore should be applied to the vulcanised silicone area to be in contact with the next stage.

Do not confuse Agent Separatore with a universal demoulding agent. In this application, the product is used specifically for separation of two silicone parts of the same mould.

Useful complementary products:

• Silicone RTV2 for moulds - for the realization of the parts of the mould;
• brush - for the controlled application of Agent Separatore;
• betaine - used in certain methods for defining the separation plan and preparing multipart moulds;
• containers and mixing spatulas - for preparing the RTV2 silicone.

Common questions about Agent Separatore

Conclusion

Separatore release agent, 200 ml is an auxiliary product for the manufacture of two or more parts of Silicone moulds. Applied by brushing on the contact surface between two stages of the mould, it is intended to prevent the gluing of the new silicone applied by the already vulcanized silicone and allows further separation of the parts of the mould.