Bronze filler

Bronze Filler 

It is presented as 99.90% pure bronze particles (65 microns).

Use Filler Bronz

Purpose of adding bronze filler is to get a artistic effect on The object poured.

Bronze filler is a "dust" filling material used to pour objects from resins (polyester, polyurethane, epoxy, acrylic) with the purpose of obtaining "artistic" effects.

The proportion of filler that can be added to the resin ranges from 100% to 300% (100g filler / 100g resin up to 300g filler / 100g resin). The filler finding a filling material does not react with the two components of the resin (base and hardener) and then the mixing rate is not very strict, the only influence consisting in changing the vascosity of the resin when casting.

As practice the filler is added following the following steps:

• Weighing desired amount of resin (basis) In a container.

• Weigh the appropriate amount of resin (tightening) In a separate container.

• Add the amount of filler needed in the base container and mix until homogenization.

• Add the amount of filler you want in the tentor container and mix until a homogeneous mixture.

• Mix the content of the 2 containers and pour.

* Because the "working time" of polyurethane resin is generally only a few minutes, if the base is mixed with the resin tensifier and then bring the filler, risk the resin harden before you can pour it, so the filler is mixed separately into the 2 components before mixing them.

Bronze filler applications:

• Applicable for the entire range of resins (polyurethane, epoxide, polyester, acrylic), gel layers, casting compounds, blasting

• It is used to obtain an artistic effect on the molten object, or it mixes the surface layer to obtain objects with a similar appearance to those cut from bronze.

Bronze Filler Properties:

•  easy to use
• low dust level

Packing bornz filler:

•  0.25 kg bronze filler
• 1 kg bronze filler

Term of validity bronze filler

• Unlimited