Iron filler

Use Filler Iron

Purpose of adding Iron filler RZ 60 is to increase resistance The object poured.

Iron filler RZ 60 is a metal powder filling material used to pour polyurethane resin objects (Multicast range) or pour epoxy resin. It is recommended to add filler for all cast objects with a thickness greater than 5 mm.

The proportion of filler that can be added to the resin ranges from 100% to 300% (100g filler / 100g resin up to 300g filler / 100g resin). The filler finding a filling material does not react with the two components of the resin (base and tensifier) and then the mixing rate is not very glass, the only influence consisting in changing the vascosity of the resin when casting.

As practice the filler is added following the following steps:

• Weighing desired amount of resin (basis) In a container.
• Weigh the appropriate amount of resin (tightening) In a separate container.
• Add the amount of filler needed in the base container and mix until homogenization.
• Add the amount of filler you want in the tentor container and mix until a homogeneous mixture.
• Mix the contents of the two containers and pour.

* Because the "working time" of polyurethane resin is generally only a few minutes, if the base were to mix with the resin tensifier and then bring the filler, risk the resin to harden before you can pour it, so the filler mixes separately in the two components before mixing them.

Iron Filler Applications

• Metal filler (Fe, 60 μ)
• Applicable for the entire range of resins (polyurethane, epoxide, polyester), gel layers, casting compounds, blasting

Property Filler Iron

• dark metallic colour
• easy to use
• low dust level

Filler Iron Packaging

• Bag - 25 kg
• * repackaging at 1 kg

Shelf life Filler Iron

• Unlimited