Chopped glass fibre filler, 4.5 mm

Glass fiber chopping filler - 4.5 mm

It is presented as filaments of fiberglass, cut at lengths of about 4.5 mm. Purpose of adding filler - glass fiber chopped is to increase resistance to bending of the object poured.

Use fiber glass chopping.

The filler - glass fiber chopping is a filling material used to pour objects from resins. It is recommended to add filler for the habits to which it is intended to increase resistance to bending.

The filler finding a filling material does not react with the two components of the resin (base and tensifier) and then the mixing rate is not very glass, the only influence consisting in changing the vascosity of the resin when casting.

As practice the filler is added following the following steps:

• Weighing desired amount of resin (basis) In a container.
• Weigh the appropriate amount of resin (tightening) In a separate container.
• Add the amount of filler needed in the base container and mix until homogenization.
• Add the amount of filler you want in the tentor container and mix until a homogeneous mixture.
• Mix the contents of the two containers and pour.

* Because the "working time" of polyurethane resin is generally only a few minutes, if the base were to mix with the resin tensifier and then bring the filler, risk the resin to harden before you can pour it, so the filler mixes separately in the two components before mixing them.

Fibre glass chopped applications

• By adding increases the strength of the cast objects with this filler in composition. 
• Applicable for the entire range of resins (polyurethane, epoxy, polyester), gel layers, casting compounds

Fibre glass chopped properties

• white / glass
• easy to use
• length 4.5 mm
• material is moisture sensitive.

Glass fiber chopped packaging

• Box - 20 kg
• * repackaging at 1 kg

Shelf life glass fibre chopping

• Unlimited