Skip to Content
CATALOG BESTTOOLS

Release agents

Moulding agents for separating the workpiece and protecting the working surface.

View products
Representative image for Release agents
ABOUT THE RANGE

More about Release agents

Lifting agents prevent the gluing of various materials, making "easy" separation of two different materials. In our range of "release agents" find the following products:

Agent release - Spray, is a demoulding agent that is based on a lubricant and is used to make silicone moulds. Not recommended for resins or other more aggressive materials.

Agent WAX 200L, and Agent ADSE, liquid wax-based demoulding agents with high efficiency, used for resins (epoxy, polyurethane, polyester). They can use a gun or a gun.

AD-TW demoulding agent, pasta-based demoulding agent, recommended for absorbent surfaces or where it is intended to cover irregularities. It's a policy. Apply with a cloth or brush.

release agent - GWax200S-Spray, removal agent pa base liquid wax, spray, resistant up to 180 C, recommended for thermoforming operations.

Agent WATER-WAX, synthetic wax-based demoulding agent dissolved in water. It's a demulator that doesn't attack polystyrene.

Polyvinyl alcohol PVA, polyvinyl alcohol-based emulsion agent, coloured in blue. It forms a separation film and is especially recommended on absorbent materials (plaster, cement, wood) as a first start before the demoulding agent.

Select below, the demoulding agent suitable for your application:

FROM THE SHOP

Available products

Release agents

Moulding agents for separating the workpiece and protecting the working surface.

AD-SE liquid wax release agent
(1)
Liquid wax emulsion agent - AD SE 1,5Kg / 3,5kg - is a type of liquid demoulding agent, based on wax, with good grip on the model and high efficiency.
250.25 lei
AD-TW paste release agent
(3)
Apply and stretch by polishing with a cloth. It takes a period of 30-40 minutes to fully strengthen and then it can be polished. The process can be repeated 2-3 times.
71.22 lei
NEUKADUR PVA Altropol 0.9 kg | Blue release agent
(4)
One of the most common causes of a difficult demoulding is the uneven application of the demoulding agent. A missing or insufficiently covered area may allow the material to be attached to the mould and may compromise the work piece or…
123.49 lei
Release agent spray
(18)
It is a spray-type emulsion agent, which does not contain silicone oil and can be used in the casting process of silicone molds.
39.20 lei
Polivaks EKO PVA 1 litre | Mould release agent
(0)
Polyvaks EKO PVA is a liquid separation agent based on polyvinyl alcohol, designed to form a continuous film between the surface of the mould and the applied material. The PVA film offers an additional level of safety when emulating…
78.41 lei