| System | Two-component semi-thixotropic polyurethane |
|---|---|
| A : B ratio (by weight) | 100 : 25 |
| Hardness | 30–40 Shore D |
| Use | Coating EPS, XPS, PUR and PIR parts |
| Working time | 25 minutes |
| Drying (20 °C, 50% RH) | 2–3 hours |
| Sanding and painting | 48–72 hours |
| Final curing | 7 days |
| Manufacturer | COLTECH |
|---|
Tell us what you want to make, and we will help you choose the right material.
Explore the description, applications and recommendations for this product.
Read the full descriptionresin COLTECH C 2205, is a polyurethane resin, two-component (A + B), solvent-free, slightly brushable, specially designed for coating / stiffening polystyrene parts. COLTECH C2205 offers excellent durability, high impact resistance, elasticity, chemical resistance and minimal contraction.
The product is offered in standard cream color. Other colors can be made on request, depending on the quantity ordered.
The most popular applications of the polyurethane resin COLETCH C 2205 are:
The integration of Coltech C 2205 resin in your projects will bring the following advantages:
Surface preparation: Before application, check that the polystyrene (EPS, XPS) / surfaces are free of any moisture (maximum moisture content of the surface should not exceed 4%).
Mixing and casting: Resuspend COLTECH C 2205 Component A well before use. Coltech C 2205 must be stored and used at a temperature above 15 ° C
COLTECH C 2205 Component A and Component B must be mixed with a low-speed mechanical shaker according to the mixing ratio indicated in this technical chart for approximately 2 min. Mixing the components must be done very well, especially on the walls and bottom of the bucket, until the mixture becomes completely homogeneous. After initial mixing of the two components, transfer the mixture into a clean container and mix again for 1 minute to ensure that the components have been thoroughly mixed.
RECOMMENDATION: Use a vacuum machine of adequate size (-1 bar) to remove air bubbles from the COLTECH C 2205 A + B mixture, directly after mixing and before casting.
Apply COLTECH C 2205 resin with a brush on the surface of polystyrene. After 1-2 hours apply the next layer of the COLTECH C 2205 resin. (specific density mix 1.4 kg / litre).
Finishing and dyeing: At 48-72h after application of the last layer of COLTECH C2205, the spot is ready for grinding and painting.
Please use paints that are compatible with PUR resins. We recommend a test of adhesion first.
The galleries should be kept in dry and cool rooms for up to 9 months. Protect material against moisture and direct sunlight. Storage temperature: 15- 30C. The products must remain in their original, unopened containers, bearing the manufacturer's name, product name, batch number and safety labels for application.
Safety measures: Contains isocyanates. Please study the material security data sheet.
FOR PROFESSIONAL USE ONLY.
Consult the safety data sheet and batch label before use.
A : B ratio (by weight): 100 : 25.
Hardness: 30–40 Shore D.
Use: Coating EPS, XPS, PUR and PIR parts.
Working time: 25 minutes.
Final curing: 7 days.
Acest produs nu are inca recenzii.
Autentifica-te pentru a scrie o recenzie
| Manufacturer | COLTECH |
![[PU KIT C2205_5Kg] Coltech cc2205 - Rasina polistiren](/web/image/product.image/1409/image_128/%5BPU%20KIT%20C2205_5Kg%5D%20Coltech%20cc2205%20-%20Rasina%20polistiren?unique=bc6b764)
![[PU KIT C2205_5Kg] Coltech cc2205 - Rasina polistiren](/web/image/product.image/1409/image_1024/%5BPU%20KIT%20C2205_5Kg%5D%20Coltech%20cc2205%20-%20Rasina%20polistiren?unique=bc6b764)
